1 Liter Tri Glass Ultraviolet Thin Resin
A low viscosity, optical-grade ultraviolet curing resin with very good adhesion to glass. Bonds resist yellowing and are resistant to moisture and organic solvents. This blend of Urethane oligomer and Methacrylate monomer blend has a viscosity of 20 cps (one-third that of the Thick UV Resin) and can be cleaned up with Isopropyl alcohol and chlorinated solvents (clean stainless steel injector with acetone).
“Very Good” Strength, Moisture Resistance and Resistance to Yellowing. Low refractive Index of 1.52. Film Tensile Strength of 6,800 psi. Adhesion Tensile on Glass of >1,500 psi. Full cure rate for a 2-mil gap is 30-45 seconds @ 25 mW/cm-2 intensity of a 365-nanometer wavelength ultraviolet light.
Up to 2 years (when stored below 90oF, out of sunlight, and in original container).
Feature & Benefits:
Tri Glass UV Thin Resin is formulated to produce an optically superior bond; a low refractive index means repairs will be nearly invisible when used correctly. Formulated to produce remarkably strong, permanent bonds for all climates, all Tri Glass resins pass two-year weather, age and field tests. When used properly, Tri Glass resins will help retain the original structural integrity of a windshield.
Preferred by some for its easier flow rate.